Montique shelving system in champagne — beside it the profiles stacked flat

Pre-launch — Batch 01 from winter 2026

Shelving system — made in Germany Aluminium. Modular. Precise.

Furniture gets replaced.
Systems grow.

Shelves are bought, screwed together and thrown out at the third house move — because the home changes, not the furniture. Montique is built to change: take it apart, build it again, extend it. As often as your life asks for it.

The joint: one node, four profiles — each one slides in.

The system

One element.
One system.

Montique reduces furniture making to a single basic element: the aluminium profile with its integrated joint. No visible screws, no add-on connectors, no hidden mechanics. The same profile stands as a side panel, lies as a shelf, divides as a divider.

Montique in a stepped configuration — champagne anodised profiles in the room

Batch 01 in the room — the “Steps” configuration

The profile

Two formats: 18 and 36 centimetres. The connecting geometry is part of the profile — not screwed on, not glued in.

The joint

The profiles interlock positively and without play. An expansion dowel fixes the connection — made to unusually tight tolerances.

The configuration

Sideboards, shelving walls, room dividers — from the same profile, recombined at any time.

The build

Board by board.

The feet are standing. The first shelves slide into the joint.

The side panels slide into the same joint — by hand, without tools.

Every shelf slides into the joint — positively, without play.

From three original parts: profile 360 · foot 110 · edge profile 320.

Anodised in five tones — the joint stays the same.

The joint

Visible.
Not hidden.

Where other systems hide their engineering, Montique shows it. The joint is part of the design — and made precisely enough to carry the structure.

Slide

Every element slides into the same joint — clear without instructions, without tools.

Fix

One tool, one movement: the expansion dowel tightens the connection without play.

Rebuild

The same in reverse: release, reposition, extend.

The joint in motion — the profile slides in. The first prototype.

Material & manufacture

Anodising is not a coating.

When aluminium is anodised, the surface turns into a hard oxide layer of its own: it protects the metal — and the colour is embedded in that layer, not applied on top. Nothing can flake off. Scratch-resistant, UV-stable, permanently colourfast.

Material

Aluminium — light, dimensionally stable, 100 % recyclable.

Finish

Anodised in five tones — from silver to gold, with metallic depth.

Manufacture

In Germany, in small batches, with specialist partners.

Compatibility

Every profile stays compatible — batch after batch.

The first physical Montique prototype in anodised aluminium, in production
The first prototype in production — a real photograph, not a rendering
Montique as a freely turned shelf sculpture with a bust on a plinth
A hand guides a shelf into the joint — assembling Montique by hand
The same system — taken apart, moved, set up again

It moves house with you.

First flat, then the bigger one. First books, then vinyl, then both. Montique is not replaced along the way but rebuilt — taken apart, set up again, extended. What grows with you does not need replacing.

Configurations

Four starting points.

Every configuration is built from the same element. One profile costs 139 €, and the system price follows from its parts — no package mark-ups, no discount logic.

Duo 2 × 1 1,383 € Tower 1 × 3 1,818 € Carré 2 × 2 2,136 € Magnum 3 × 2 2,929 € Or configure freely →

All prices incl. VAT. Free shipping within Germany on orders over €250. Other countries on request.

Starting point Carré — four cubes in anodised aluminium, 3D view of the CAD model
Starting point Carré — 2 × 2, extendable at any time
Open in the configurator →

Owners list

Be there first.

Batch 01 comes in small numbers. On the Owners list you hear it first — and receive the material dossier on anodising, the joint and manufacture.

Behind Montique

“Engineering meets design. Thought through together from the start.”

Reiner Wallbaum

Engineering & manufacture

Toolmaker and design engineer with more than 30 years of product development. Responsible for the system, the engineering and manufacture.

Tom Sion

Design & identity

Designer and brand developer. Responsible for design, identity and the digital presence.

Journal

The joint in cross-section — two Montique profiles interlocking, 3D view

Journal — essay

Why we make connections visible.

On Rietveld, Prouvé and the honesty of the joint.

Essay 01 — published at launch

Service & warranties

30-day returns

Build it, live with it, decide. If it does not fit, it goes back.

Spare parts & extensions

Available to reorder — compatible across all batches.

Longevity as standard

Can be retightened, repaired and taken apart. Built to last decades.

Personal advice

Configuration, planning, service: directly with our team.